dbx 160A Compressor
dbx 160A Compressor
$0.00
The dbx 160A is part of the legendary dbx 160 family of compressor/limiters. The same classic sound, easy set-up and no compromise metering is now married to an improved signal path and stronger chassis design. The result is a industry standard compressor/limiter which is digital-ready and road tough.
Specs:
- Input Connectors: 1/4" TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot
- Input Impedance: 40k Ω
- Max Input: +24dBu, Balanced or Unabalanced (Absolute)
- CMRR: >45dB (any frequency)
- Detector Input: 1/4" TRS phone, Floating Balanced
- Detector Input Impedance: >200k Ω
- Detector Input Max Level: +28dBu, Balanced or Unbalanced
- Output Connectors: 1/4" TRS phone, Unbalanced; XLR, floating balanced; pin 2 hot
- Output Impedance: Balanced 200 Ω, unbalanced 100 Ω
- Max Output: (Balanced): +24dBm; <0.3% THD; (Unbalanced): +20dBm; <0.3% THD
- Noise: <-90dBu, Unweighted (20Hz - 20kHz)
- Frequency Response: 20 - 20,000 Hz
- THD: <0.2%, Typical, any amount of compression up to 40dB @ 1kHz
- Compressor Threshold Range: -40dBu to +20dBu
- Compressor Threshold Characteristic: OverEasy® or hard knee
- Compressor Ratio: Variable 1:1 to :1 thru to -1:1; >60dB maximum compression
- Compressor Attack Time: Program dependent; typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB
- Compressor Release Time: Program Dependent; Typically 8ms for 1dB, 80ms for 10dB, 400ms for 50dB; 125dB/sec rate
- Dynamic Range: >113dB
- Gain Adjustment Range: -20dB to +20dB
- Stereo Coupling: True RMS Power summing
- Summing: 1/4" TRS phone jack
- Operating Voltage: 200-250VAC, 50/60Hz
- Power Connector: IEC receptacle
- Dimensions: 4.45cm x 48.2cm x 16.51cm
- Weight: 1.99 kg