HME DX200 Intercom System

dx200-2sqr.jpg
dx200-2sqr.jpg

HME DX200 Intercom System

0.00

The DX200 System comes complete with synthesized voice prompts, rechargeable batteries, battery charger and rugged, lightweight beltpacs for reliable and cost-effective operation. 

With digital encryption and frequency hopping technologies, you'll never have to worry about unauthorized users hearing your communications. 

For crystal-clear, secure and interference-free communications, the digital DX200 System is designed to give you superior performance at affordable prices.

Enquire
  • Frequency Range: All, 2400 to 2483.5 MHz Low, 2401.92 to 2439.94 MHz High, 2443.39 to 2481.41 MHz
  • Frequency Response: 200 Hz to 3.5 kHz
  • Power Requirements: 100-240VAC, 50-60Hz or 12-14VDC
  • Temperature Range: 32-122°F (0-50°C) Size: 19” x 1.72” x 17.13” (1-RU) (48.26 x 4.37 x 43.51 cm)
  • Weight: 9.2 lbs. (4.18 kg)
  • Maximum # of Beltpacs per Base: 15 can be registered Any 4 can have simultaneous full-duplex communication at one time
  • 4-Wire I/O: RJ45, 600Ω balanced, level adjustable, simultaneous operation with 2-wire
  • 2-Wire I/O: XLR-3M, XLR-3F, externally-switchable RTS® or Clear-Com® mode, 200Ω, level adjustable, null adjustable
  • Auxiliary Input: XLR-3F/¼” (6.35 mm) combo jack, 600Ω balanced, level adjustable
  • Auxiliary Output: XLR-3M, 600Ω balanced, level adjustable 8Ω
  • Speaker Output: 1W into 8Ω
  • Headset Connector: 4-pin mini-DIN Electret microphone
  • Headset Output: 250mW into 32Ω
  • Front Panel Controls: Power switch Clear/Band, Reset, Unlatch and Register buttons, IC and ISO Receive level adjustments, IC 2W/4W and 4W-Only buttons, IC4W-Only Send and Receive level adjustments, Auxiliary In and ISO+ buttons, Auxiliary In and Out level adjustments, Rotary knob for volume adjustment, Headset IC/ISO Select button and Headset Talk button
  • Front Panel Indicators: Status indicator, IC and ISO Receive LEDs, IC 2W and 4W-Only LEDs, Auxiliary In/Out LEDs, Headset IC/ISO select LEDs, Headset PTT LED
  • Rear Panel Controls: Clear-Com®/RTS® mode switch, RTS® Channel 1/2 switch, 2-wire channel line null adjustment
  • Antenna Type: External ½ -wave dipole (R-TNC connector) RX/TX horizontal/vertical diversity
  • System Distortion: <2%
  • Communication Security: 64-bit encryption dual-slot diversity

Transmitter

  • Type: Frequency hopping, spread spectrum
  • Transmit Power: 100mW burst
  • Modulation Type: Gaussian filtered FSK, TDM
  • Frequency Stability: 13 ppm
  • Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature

Receiver

  • Type: Frequency hopping, spread spectrum
  • RF Sensitivity: <−90dBm w 10-3 BER
  • Frequency Stability: 13 ppm Distortion: <2%