|
|
STEREO
MICROPHONES: |
| Click
on photos and links for more information |
 |
Neumann
RSM 191 Stereo Microphone |
The
RSM191 is a high-quality stereo shotgun microphone
that can be operated either in MS
or XY configuration. |
|
 |
Neumann
USM 69i Stereo
Microphone |
Stereo
condenser microphone with built in directional pattern
selectors. Omni-directional wide-angle cardioid, standard
cardioid, hypercardioid and figure-eight. Complete with
Rycote windshield, handgrip OR studio windshield and
microphone support mount. |
|
 |
AKG
C-522 MS
Stereo Microphone |
An
optimum-quality stereo microphone for voice, effects
and music recording. The C522 MS has three condenser
transducer capsules - one front facing cardioid capsule
and two capsules angled at plus or minus ninety degrees
to the sides. |
|
 |
Shure
VP88 MS Stereo
Condenser Microphone |
The
single-point MS stereo condenser VP88 incorporates
a forward-facing cardioid “Mid” capsule,
a perpendicular bi-directional “Side’ capsule
and a built-in stereo matrix to provide wide stereo
"spread". |
| |
|
|
|
|
|
HEAD-WORN
MICROPHONES: |
 |
Voice
Technologies Range of Headsets: |
| |
 |
AKG
C 420 Micro Microphone |
The
C 420 is a cardioid condenser microphone. -
Has a new lightweight “behind the ear” band.
-
Frequency range – 20 to 20kHz 7mVpa (-43 dBv).
-
Impedance 200?, maximum SPL (1% THD) 126db. |
| |
 |
Countryman |
The
first ever hypercardioid condenser head-worn microphone.
The headband fits around back of the head for minimum
visibility. P48 phantom-powered or a special version
for direct powering from Sennheiser or Shure pocket
radio microphone transmitters. |
|
 |
Countryman
E6 Ear Set
Microphone |
Perfect
on stage, the E6 clips around the ear and
comes with either 1mm or 2mm cable. A wide variety
of connectors can be attached for compatibility with
any wireless microphone transmitter. |
|
|
 |
Crown
CM-311 |
The
CM 311 is designed for touring sound and is a rugged
head-worn microphone for musicians or
sports-casters. |
|
 |
Crown
CM-312 |
The
Crown CM-312 is a rugged, lightweight head-worn
hypercardioid microphone designed for aerobics, live
entertainment, and sports broadcasting. |
| |
 |
DPA
Model DPA 4065 |
The
4065 is a miniature headset that comes in beige
or black and depending on the model, bends to fit for
microphone placement on the left or the right side of
the head. It uses a pre-polarised omni-directional cartridge
element with a 5.4mm vertical diaphragm. |
|
 |
DPA
Model DPA 4066 |
The
DPA 4066 has all of the features of the DPA 4065
with the added benefit of additional flexibility in
mode of use. The headband construction is unique in
that it allows the microphone to be worn on either the
right or left side of the head and independently of
headband. |
| |
 |
DPA
Model DPA 4088 |
The
smooth and elegant design of the DPA 4088 makes
it the most invisible headworn cardioid microphone today.
Sound quality, visual elegance and versatility
go hand in hand to transform every show into the performance
of a lifetime. |
| |
 |
Shure
WH10 Head-Worn
Microphone |
The
WH10 dynamic head-worn microphone provides reliable
performance in active applications such as stage vocals,
aerobic instruction and DJ work. For use with Sennheiser
or Shure pocket radio microphone transmitters or as
a hard-wired microphone. |
| |
|
|
|
|
|
MINIATURE
INSTRUMENT MICROPHONES: |
 |
Shure
SM98A |
Unidirectional
surface-mount microphone with a high-quality electret
condenser element and preamplifier. Ideal for TV, news
conferences, stage productions. Also excellent for kick
drums or acoustic pianos. |
|
|
|
LOW
PROFILE DESK MICROPHONES: |
 |
Shure
SM91 / Shure 819
(PZM-Style Microphone) |
Unidirectional
surface-mount microphone with a high-quality electret
condenser element and preamplifier. Ideal for TV, news
conferences, stage productions. Also excellent for kick
drums or acoustic pianos. Battery or phantom powered,
this microphone can also be used with a Shure radio
transmitter. |
|
|
|
LIP
RIBBON MICROPHONES: |
 |
Coles
4104 Commentator's
Lip Ribbon Microphone
|
The
4104 commentators’ noise-cancelling ribbon
microphone is a BBC design, and is widely used for reproducing
high quality commentary and other speech in noisy surroundings
by cancelling out a considerable degree of background
noise. |
| |
|
|
|
|
|
COMMENTATOR'S
MICROPHONES & HEADSETS: |
 |
Sennheiser
HMD 25-1
Commentator's Headset |
The
HMD 25-1 headset features an MD 414 super-cardioid
close-contact dynamic microphone with closed-cup headphones
and has has been designed for use in noisy environments.
It has rapidly become the de-facto standard for sports
commentators. |
| |
 |
beyerdynamic
Model DT109
Commentator's Headset |
The
industry standard, Beyer Dynamic model DT 109 headset
with five or six-pin XL connector to suit Mooretronics
Sports Commentator units. |
| |
|
Coles
4104 Commentator's Lip
Ribbon Microphone |
The
4104 commentators’ noise-cancelling ribbon
microphone is a BBC design, and is widely used for reproducing
high quality commentary and other
speech in noisy surroundings by cancelling out a considerable
degree of background noise. |
| |
 |
MB
Quart Model MBK 900 SC
Commentator's Headset |
MB
Quart model K 900 headset with five or six
pin XL connector to suit Mooretronics Sports
Commentator units. |
|
|
|
|
|
|
UNDERWATER
MICROPHONES: |
 |
DPA
8010 Hydrophones
(Will only operate underwater) |
This
a 4V phantom-powered, waterproof microphone designed
to handle high sound pressure levels and the static
ambient pressure in water. The 8010 uses a piezoelectric
sensing element, which is frequency compensated to match
under water acoustics. |
|
|
|
PARABOLIC
REFLECTORS: |
 |
Big
Ears Parabolic Reflector
(without microphone) |
The
BIG EARS parabolic reflector facilitates “sound
gathering” in situations that were hitherto considered
impossible, leading to results previously “unheard
of” in terms of clarity and quality. |
|
|
|
MICROPHONE
ISOLATION TRANSFORMERS: |
 |
Proco
MS-43A Microphone
Isolation Transformers |
The
system is built around a four-channel module 1RU
high. Each channel has an XL input and an XL direct
output. The isolated output appears on XLs both on the
front panel and in parallel on the rear of the unit.
|
|
|
|
MICROPHONE
WINDSHIELDS: |
 |
Rycote
"Windjammers" |
We
have a range of 'Windjammers' fluffy covers to fit
the following 'Blimps': Sennheiser 416, 816, MKH 60,
MKH 70 and the Shure VP88. |
|
|
 |
Rycote
"Zeppelin" / "Blimp" Modular Windshield
Range |
We
have a range of 'Zeppelin' hard covers to fit the
following microphones: Sennheiser 416, 816, MKH 60,
MKH 70 and the Shure VP88. |
| |
|
|
|
|
|
MICROPHONE
ACCESSORIES: |
 |
Sennheiser
P48 Battery
Phantom Power Supply |
Sennheiser
P48 Battery Phantom Power Supply. |
|
 |
LA
Audio D12 Active Direct
Injection Box |
The
LA Audio D12 features automatic power switching
from dual 9-Volt batteries to phantom power when available.
A four-position dual switch provides up to 40dB of attenuation.
Other features: a ground lift switch, balanced and unbalanced
output and a link facility. |
|
|
|
|
|
MICROPHONE
BOOMS: |
 |
Studio
Booms J.L. Fisher
Models 2/3 |
Three
complete “2/3” booms are available. The
“2/3” is eminently suitable for use either
in the studio or on location for film and TV production.
Available in Melboune, Brisbane and Sydney! |
| |
 |
Boomshadow
VDB604 |
Rigid,
light and strong, they benefit from the
recent technologies in carbon fibre winding and
the experience of fourteen successful years of
supplying the most demanding operators. |
| |
 |
Lightwave |
Telescopic
fish-pole booms long and short. |
|
 |
Panamic
Carbon Fibre Boom |
Long
telescopic carbon fibre fish-pole boom –
extra light! |
| |
|
|
|
MICROPHONE
STANDS and MOUNTS: |
 |
Konig&
Meyer (K&M)
microphone stands
with boom arms |
Industry-standard
Konig & Meyer folding
telescopic microphone stands with boom arms:
the best available! |
| |
 |
Manfrotto
Super-Clamps |
These
handy devices are perfectly suited to a number of
mounting applications where the surface is either soft
or slippery. It consists of two rubber-faced jaws shaped
to grip circular or square objects like lighting grids
or ground-support drape kits. |
|
 |
MT&A
Custom Limpet Mounts |
This
is one of Murray’s clever adaptations using
a standard Limpet suction-mount as normally used by
Grips to mount camera rigs on cars. |
| |
|
|
| |
|
|
|
|
